Many friends who bought the Buick GL8 are satisfied with the interior space of the car. Compared with other models of the same class, it can still ride comfortably when the passengers are fully loaded, and the luggage space at the rear of the car can still meet the needs of the whole car. Passenger travel needs. However, when there is not much luggage and the third-row passengers are often seated, the legroom of the third-row passengers is stretched, so by installing slide rails for the third-row seats, you can flexibly control the interior space.
In simple terms, it is actually installing a slide rail between the seat and the fixed frame, and online e-commerce can buy such products directly , and there are not many tools needed, or you can directly find a repair shop to operate after ordering, the whole process is not complicated.
The first thing to do is to remove the third row of seats. There is nothing to say about this. After folding over, remove the screws and do some removal. If there is a seat cover on the seat, it is recommended to remove it first to avoid affecting the installation of the slide rail.
Remove the screws of the seat and bracket, because we operate in the shop, the tools are relatively complete, and the master has installed it many times The bracket is easy to operate, and the most important step in this step is to know which screws to remove, which can also be directly judged by the naked eye.
The removed screws must be properly stored, and the mounting rails have special screws for installation, and special screws must be used when dismantling tools, avoid screw gaps.
After removing the original base, you can see the installation position of the slide rail, which is installed on the four longitudinal beams. Pay attention to the direction of the base when disassembling and assembling the bracket, and install it back in the original direction after a while.
This is the GL8 third row seat rail provided by the store. The products bought online are basically the same, but they may be different manufacturers Production, the effect is basically similar, the adjustable distance between the front and rear is about two punches.
When installing, first compare the screw holes of the product. After confirming the installation position, the screws should be tightened. Do not lock them directly. At this time, attention should be paid to The sliding direction of the slide rail is usually extended backward.
Then we put back the original base for sliding test, See if the slides run in sync and slide smoothly. During the test, due to the false installation of screws and the large sliding resistance, it is best to carry out the test with two people, and pay attention to safety during operation.
After confirming that the slide rail is installed successfully, tighten all the screws, and then lift the seat back into the car for installation. There is no change, so the installation is exactly the same as the original seat, and the installation is firm.
The front and rear adjustment wrench will be installed when the slide rail is installed, which is similar to the original seat, just lift it up The seat can be operated to slide back and forth. Note that the seat slides back and forth as a whole when sliding, so it is best to operate it by one person.
Through the comparison chart, you can see the change of the front and rear sliding of the seat. The front and rear movement space of the seat is very large. 2 punches away.
Summary:After installing the slide rails, everyone is most concerned about the firmness and the storage space of the trunk. There is no need to worry about the above two points, as long as the seat slide rails are installed The installation is firm, and there will be no problems in driving. This principle is the same as the sliding form of the front seats. In addition, it can be extended to the maximum in time, and the luggage space is still sufficient, but we can’t measure the volume at this time, but because it is in the form of slide rails, when the space is not enough, just adjust the slide rails forward, and after installing the slide rails It still does not affect the folding of the seat, which the owner can rest assured.