Many friends still prefer manual gears between manual gears and automatic gears, so there will be a problem with manual gears, stalling! How can it not stall when the manual gear starts? Of course, if it is kept on, it will definitely not be turned off! Let’s take a look below.
You start the car in neutral first, then quickly depress the clutch, put the gear in 1st gear, and then you slowly release the clutch, feel where the release is and the car will start to move forward, once you feel the wheel When moving, hold the clutch and lightly add the accelerator, do not release the clutch quickly, otherwise the vehicle will rush forward. The vehicle moves forward and stabilizes the clutch for two to three seconds, lightly depresses the accelerator, and slowly releases the clutch at the same time, so as to start It is relatively stable. When shifting to 2nd gear, it is easy to throttle. If you release the throttle suddenly, sometimes the vehicle will rush forward. Use the same method to shift the gear to 2nd gear, and you can use the clutch with one foot. The most important thing is to feel loose. The point at which the vehicle moves forward when the clutch is engaged. As long as you find this point accurately, and when you reach this point every time you shift gears, press the accelerator lightly and then release the clutch, basically the vehicle will be relatively stable.
Don’t be nervous when waiting for the traffic light. When the red light has the last 5 seconds, you can step on the clutch and slowly release the clutch. When you see the car in front moving in the last second, you lightly step on the accelerator. Then slowly release the clutch. It is not easy to stall.
A car with a manual transmission stalls on an uphill, how can the car not slide down when starting?
Friends, let me tell you how to master the Banpo start relatively easily. First apply the brakes, then the clutch, and engage first gear. Then slowly lift the clutch pedal of the left foot. When it reaches a certain position, you will feel that the engine sounds a little bit, and the body starts to churn. At this time, it has also reached the clutch point. Now release the brake pedal, and the vehicle It will not go backwards, and then lightly step on the accelerator, and the vehicle will start smoothly.
After the vehicle starts, slowly release the clutch pedal. Isn’t it easy, just practice a lot. I believe you will be able to master it soon.