Breakdown 1: Oil Pipe Broken
The car should be equipped with rubber plastic pipes of the same diameter as the oil pipe for socketing. Tighten it with iron wire to prevent oil leakage.
Emergency 2: Oil Pipe Breaking
When the oil pipe breaks, clean the rupture, apply soap, and wrap a cloth or tape around the oil pipe Crack and tie with wire, and then apply a layer of soap.
Emergency 3: Oil leakage from oil pipe joint
You can wrap cotton yarn around the lower edge of the horn, and then tighten the oil pipe nut and oil pipe joint; Chew bubble gum or maltose into a paste, apply it to the mouth of the tubing nut, and seal it after it dries.
Emergency 4: Fuel tank damage
When the motor vehicle is in use, it is found that the fuel tank leaks. Bubble gum is applied to the oil spill to temporarily block it; repair it with epoxy adhesive for better results.
Emergency 5: Crack of the sedimentation cup
Cover the inlet and outlet of the sedimentation cup with a tape tube or plastic tube, so that the oil does not pass through the sedimentation cup directly .
Emergency 6: Rupture of the inlet and outlet hoses
If the rupture is small, use a cloth coated with a layer of soap to wrap up the leak; If the rupture is large, cut off the rupture of the hose, put a bamboo pipe or iron pipe in the middle, and tie it with iron wire.
Emergency 7: Broken valve spring
The broken spring can be removed, and the two broken sections can be installed in reverse, and it can be used . If the spring is broken into several sections, the cylinder’s intake and exhaust valve adjustment screws can be removed to keep the valve closed and the cylinder to stop working.