The most common condition for a power window is that the rubber strip in the glass track is hardened or the card is dirty, causing the glass to go up and down or get stuck. Therefore, spray some WD-40 to lubricate the glass lifting track on weekdays. For rubber strips, there is also a maintenance agent, which can maintain the toughness of the rubber after coating and reduce the occurrence of dry cracking.
Netizen Ms. Yang: Recently, I found some small problems with the power windows of the car. How to maintain the power windows?
Reply: The most common condition of power windows is that the rubber strip in the glass track is hardened or the card is dirty, making the glass not smooth or stuck. Therefore, spray some WD-40 to lubricate the glass lifting track on weekdays. For rubber strips, there is also a maintenance agent, which can maintain the toughness of the rubber after coating and reduce the occurrence of dry cracking. Another situation is due to long-term wear and tear, such as motor failure, or the link mechanism is soaked and corroded and broken, causing the glass to derail. In such a situation, only the parts can be replaced.
Why is the compressor not working?
Netizen Mr. Zhong: My car has been in use for a long time. Recently, the air conditioner compressor will not work. What is going on?
Reply: If this happens, it may be a wiring problem. The car has several compressor control methods, one is electronic control, the other is clutch control, and the other is hybrid control. After checking which control method it is, it can be ruled out. It is recommended to go to the repair shop for a professional inspection.