With the increase in the frequency of car washing, some car owners wash their own cars, while others send them to car washes. However, car washing is also very particular. The wrong method of car washing will end the “life” of the car in advance.
1. The wipers are not dry
When washing the car, the wipers should be separated from the glass as much as possible, and then be sure to dry the adhesive strips when putting them back. Otherwise, it is easy to cause the adhesive strip of the wiper to stick to the glass, and if you just start the wiper at this time, it is easy to cause the motor of the wiper to burn out.
2. The door seam is not dry
After washing the car at this time, not only dry the body, but also pay special attention to the sealing strip on the door Any gaps should be wiped dry.
3. Wash the car with hot water
In winter, some car owners or car washers wash their cars with hot water. However, hot water is not suitable for car washing, because the surface temperature of the car is very low, and when the temperature of the car washing water is too high, the phenomenon of thermal expansion and contraction will occur.
First of all, this will damage the car paint, and secondly, the car glass will easily burst due to “sudden cooling and sudden heating” in a short period of time. Therefore, you should be careful when washing your car, and try to use room temperature water as much as possible.
4. The keyhole is not dry
Because many cars are equipped with a standard remote control, we generally do not use the key to open the door, and it will also be after washing the car. Forgot to wipe the keyhole. So be sure to remember to take a dry cloth after washing the car, or blow dry. Because this kind of hidden hole will not melt by itself once water enters.