While the car remote control brings convenience to people, sometimes there are some small problems. The following are some common problems and solutions of remote control.
(1) The remote control does not respond
If the indicator light of the remote control does not light up or is very dark when the button is pressed, it may be that the battery power of the remote control is insufficient; If the indicator light of the remote control still does not light up after replacing the battery, you should check whether the positive and negative polarities of the battery are reversed and whether the battery is in good contact with the mount; Check whether the keys are damaged. If the indicator light of some keys responds, but some keys do not, it is likely that the keys are damaged, or the remote control is damaged.
(2) The remote control cannot control the door
First of all, you should confirm whether there is a problem with the remote control as mentioned above. If there is no problem with the remote control, and the This situation occurs after replacing the battery or anti-theft system components, then the remote control should be matched according to the fixed procedure, and not all models need to be matched, and different models have different regulations; if there are two remote controls If the other remote control responds, it may be that the password of this remote control is lost and needs to be re-matched; if the remote control still cannot be used after matching, there may be a problem with the receiving host Or there is a problem with the transmitter antenna of the remote control; if the remote control host is shielded or there is a strong interference source nearby, the host cannot correctly receive the electromagnetic waves sent by the remote control, and cannot control the central door lock action.
(3)The remote control has a very close range
If this problem occurs after the remote control has been used for a while, it may be the battery level Insufficient; if it is sometimes far and sometimes near, it may be the influence of the surrounding environment; if the remote control host is shielded or interfered, this problem will also occur. Some electrical equipment has the effect of interference.