The rust and crashworthiness of the chassis has been largely ignored over the years. Acid rain, exhaust gas, snow remover, and gravel are always eroding and damaging them. How to protect our chassis? “Chassis encapsulation” came into being in a timely manner. It is to carefully decontaminate the chassis, and after degreasing, a high-adhesion, high-elasticity, high-corrosion, anti-rust flexible epoxy resin and other synthetic plastics are thickly sprayed on the chassis. It is isolated from the outside world to achieve anti-corrosion, anti-rust, anti-collision and anti-noise effects. Once “sealed”, it will last a lifetime.
Benefits of encapsulation
The protection of car chassis is usually the most easily overlooked by car owners, or simply do not know what the benefits are. According to the introduction of professional technicians, the chassis is one of the most vulnerable parts of the car, and making the chassis can bring at least six benefits to the car owner.
1. Anti-corrosion of the chassis: The rust of the car starts from the bottom plate. Don’t you see, the side beam of the car that has only been running for two or three years has begun to show rust spots. Every time the car wash sewage will remain at the bottom, and it will form a potential corrosion factor for a long time, which will cause damage to the car. If you seal the bottom of your car, then even acid rain, snow dissolver, and car washing alkaline water will all be damaged. It cannot erode through this protective film.
2. Anti-stone attack: When the vehicle is driving, small stones will be splashed, and the force of the stones hitting the bottom plate is proportional to your speed. Generally, the small stones of 10 grams are at a speed of 80 kilometers per hour. The impact force will reach 100 times its own weight. It is enough to break the paint film below 30 microns. Once the paint film is broken, the rust will start from the defect and slowly expand from the inside of the iron plate. If your car is under plastic, even if the gravel is impacted with a force of 5 kg, it cannot be broken. .
3. Anti-vibration: The engine and wheels are fixed on the chassis of the car, their vibration will resonate with the bottom plate at a certain frequency, making people feel very uncomfortable, and the bottom protection will eliminate certain resonance.
4. Insulation: In winter, when the car turns on the air conditioner in the car, the hot air often sinks, while the cold air on the ground outside the car rises, and the hot and cold air is mostly concentrated on the floor of the vehicle for exchange. The protection effect of the bottom of the vehicle directly determines the effect of the energy utilization of the vehicle. If the bottom of your car is sealed, the quartz sand in the film will completely isolate the heat and cold.
5. Sound insulation and noise reduction: When the vehicle is driving on a fast road, the friction sound between the wheels and the road is proportional to the speed. The vehicle has a complete bottom protection, which can greatly reduce the noise inside the vehicle.
6. Anti-dragging bottom: The thickness of the bottom sealing material can reach 1.5 to 2.5 mm. When the bottom is scratched by the road protrusions, the chassis molding can reduce the damage of the protrusions to the chassis.