As the weather warms up, the sunroof, which has been put on hold for half a year, finally has a role to play. However, the sunroof that has not been used for a long time makes a dry rubbing sound when it is opened, and some even get stuck halfway through opening. How can this be? How do we maintain and use this little piece of sky above our heads?
The reason why the skylight that has not been used for a long time makes an unpleasant noise, then It’s because too much dirt and grit is trapped on the rails and the rails are severely lacking in lubrication. We can do the maintenance of the sunroof by ourselves. We only need to fully open the sunroof, wipe the dust and stones on the sunroof sliding rail with a clean soft cloth, and lubricate the transmission track of the sunroof by selecting a lubricant that is not sticky and difficult to adsorb, and finally close the sunroof completely and open it several times. Wipe off excess lubricant with a soft cloth. This simple daily maintenance is complete.
We need to pay attention to the following points in daily use:
1. For the electric sunroof, it is best not to fully open the sunroof on bumpy roads, otherwise it will be caused by the sunroof and the sunroof. The vibration between the slide rails is too large to cause deformation of related components, and even damage the motor.
2. Pay attention to the waterproofness of the sunroof. The sunroof is sealed with a rubber sealing ring. During use, pay attention to the dustproof of the sealing ring, especially in winter or after a long journey, be sure to use a duster to clean it often. In addition, you must pay attention not to forcibly open the sunroof when the sunroof is frozen, which will damage the motor of the sunroof. In the season of heavy sandstorm, it is necessary to clean the sealing ring with a sponge every two months.
3. Before the vehicle is ready to park for a long time, it is necessary to thoroughly clean the sunroof track with talcum powder to avoid the appearance of aging caused by the chemical reaction of the sealing ring in the air for too long.
4. In the process of washing the car, avoid using the high-pressure water gun to directly aim the water column at the sealing ring. In this way, not only is it easy for the sealing ring to deform under the pressure of the high-pressure water column, but water enters the car, and it will also damage the sealing ring to a great extent.